When a designer hands over a finished logo, it usually arrives as a folder full of files with unfamiliar endings: SVG, EPS, PDF, PNG, JPG and sometimes AI. Many small business owners then email the wrong file to a printer, or paste a blurry image into a document, simply because nobody explained which file does what. The result is a logo that looks fuzzy on a banner, sits inside an ugly white box on a coloured background, or prints in the wrong colours.

This guide explains the logic behind logo files so you can choose the right one every time. It also lists what a complete logo pack should contain, so you can check that you have received everything before a project closes, and it explains how to store the files so they are still easy to find years later.

Vector and raster: the one distinction that matters

Every image file is either vector or raster. Understanding the difference solves most logo problems.

Vector files

A vector file describes shapes mathematically, as points, lines and curves. Because the shapes are recalculated whenever the file is displayed or printed, a vector logo can be scaled to any size, from a business card to the side of a building, without losing sharpness. Vector files are the master versions of your logo. Common vector formats are SVG, EPS, PDF and AI.

Raster files

A raster file, sometimes called a bitmap, stores an image as a grid of coloured squares called pixels. It has a fixed number of pixels, so enlarging it beyond its original size makes it blurry or blocky. Photographs are always raster images. Common raster formats are PNG, JPG (also written JPEG), GIF and WebP.

A vector file can always be turned into a raster file at any size. The reverse is not true. Converting a small raster image back into a clean vector means redrawing it, which is why losing your vector files is a nuisance that often costs money to fix.

The formats one by one

FormatTypeTransparent backgroundBest used for
SVGVectorYesWebsites, digital tools, some sign makers and cutting machines
EPSVectorYes, in most design softwareOlder print workflows, sign makers, embroidery and promotional goods suppliers
PDFVector, if exported correctlyYesPrinters, and sharing a logo that anyone can open
AIVectorYesThe designer's editable working file
PNGRasterYesWebsites, social media, documents and presentations
JPGRasterNoPhotographs, or a logo on a solid background where transparency is not needed

SVG (Scalable Vector Graphics)

SVG is an open standard maintained by the World Wide Web Consortium (W3C). It is the natural format for logos on websites, because it stays sharp on high-resolution screens, the files are usually small, and modern browsers display it directly. Some content management systems and email programs do not accept SVG uploads, in which case a PNG is the fallback.

EPS (Encapsulated PostScript)

EPS is an older vector format that has long been the standard request from printers, sign makers and promotional goods suppliers. It is less used than it once was, and many printers now prefer PDF, but it remains useful to have because some suppliers still ask for it specifically.

PDF (Portable Document Format)

PDF is an international standard (ISO 32000) and can contain vector artwork, raster images or both. A logo exported as a vector PDF scales cleanly and can be opened by almost anyone, which makes it a practical format to send to printers. Be aware that a PDF can also contain nothing more than a pasted raster image, so a PDF is not automatically a vector file. If you zoom in a long way and the edges stay crisp, it is vector.

AI (Adobe Illustrator)

AI is the native working file of a widely used design program. It is useful for designers who will edit the logo later, but you cannot open it properly without the right software. It is good to receive it for your archive, but you will rarely send it to anyone yourself.

PNG (Portable Network Graphics)

PNG is a raster format with lossless compression, meaning it does not degrade the image each time it is saved, and it supports transparency. That makes it the everyday format for logos on websites, social media, slides and documents. Because it is raster, you need PNG files at a size suitable for each use, or a large one that can be scaled down.

JPG or JPEG

JPG is designed for photographs. Its compression discards some detail to keep files small, which creates smudgy marks around the sharp edges typical of logos. It also cannot store transparency, so a JPG logo always sits in a rectangle of background colour. Use it only when the logo is part of a photograph or sits on a matching solid background.

Colour versions in a complete logo pack

File format is only one dimension. A complete pack also contains the logo in several colour versions.

  • Full colour: the main version, for use on white or light backgrounds.
  • One colour, dark: usually black, for stamps, newspaper adverts, engraving and single-colour printing.
  • Reversed: white or light, for use on dark backgrounds and photographs.
  • Alternative layouts: for example a stacked version and a horizontal version, and a symbol on its own for small square spaces such as social media profile pictures.

Each of these should be supplied in colour modes suited to their use: CMYK files for print, RGB files for screens and, if your identity uses spot colours, files set up with the Pantone references. A pack with every combination can run to dozens of files, which is normal. Good organisation, covered below, makes it manageable.

Which file to use: quick answers

SituationFile to choose
Sending the logo to a printer for leaflets or business cardsVector PDF or EPS in CMYK, or whatever the printer specifies
Signs, vehicle graphics, vinyl letteringVector file (EPS, PDF or SVG), in one colour if it will be cut from vinyl
Embroidered workwearVector file, plus a note of the colours. The supplier converts it into a stitch file
Website headerSVG, or a PNG at about twice the displayed size for sharp screens
Social media profileSquare PNG of the symbol or a compact version
Word processor or slide documentsPNG with a transparent background
Email signatureSmall PNG, as many email programs do not display SVG
Browser tab icon (favicon)Small square PNG or ICO file, plus an SVG where supported

Resolution, in plain English

Resolution only matters for raster files. For print, the usual target is 300 pixels per inch at the final printed size. A logo printed 10 centimetres wide, which is about 4 inches, therefore needs roughly 1,200 pixels across. For screens, the pixel dimensions matter more than the dpi value stored in the file, which most screens ignore. The simplest rule is to use vector files for print wherever possible, and to export PNGs at about twice the size they will be displayed on a website, so that they look sharp on high-density screens.

Text in logos and outlines

Most logos contain lettering. In the master files, that lettering should normally be converted to outlines, meaning the letters become shapes rather than editable text. This ensures the logo displays correctly on any computer, even one that does not have the typeface installed. If a supplier opens your logo and sees the wrong font, the file probably still contains live text. Ask the designer for an outlined version, and keep a note of the typeface name in your brand guidelines in case you need it for other material.

Naming and storing your logo files

A tidy folder saves time every time someone asks for your logo. A clear naming convention includes the organisation name, the layout, the colour version and the mode, for example name-logo-horizontal-fullcolour-cmyk.pdf. Group files into folders for print and for screen, and add a short text file explaining which is which.

Keep the master files in at least two places, such as a shared drive and an offline backup, and make sure more than one person in the organisation knows where they are. Designers do not always keep client files indefinitely, and the laptop of a former member of staff is not an archive.

Checking your logo pack before the project closes

  1. Open each file and check that it displays correctly.
  2. Zoom in on the vector files to confirm they are true vectors with crisp edges.
  3. Place the PNG files on a dark background to check that the transparency works and that there is no white fringe.
  4. Check that the colour values in the files match those in your brand guidelines.
  5. Ask whether lettering in the logo has been converted to outlines.
  6. Confirm in writing that copyright in the logo has been assigned to your organisation.

The last point matters as much as the files themselves. Under the Copyright, Designs and Patents Act 1988, the creator of a work is normally its first owner unless they are an employee, and an assignment of copyright has to be in writing and signed to be effective. Having the files without the rights can create problems if you later want to register the logo as a trade mark or ask another designer to adapt it.

Frequently asked questions

My printer says my logo is low resolution. What do I do?

Send a vector file instead (PDF, EPS or SVG). If you only have a small PNG or JPG, ask the original designer for the master files. If they are not available, a designer can redraw the logo as a vector, which is called vectorising or tracing.

Can I convert a JPG into a vector file myself?

Automatic tracing tools exist, but the results are often lumpy, with uneven curves and far too many points. For a logo you will use for years, a manual redraw by a designer gives a much cleaner result.

Why does my logo have a white box around it?

You are probably using a JPG, which cannot store transparency, or a PNG exported without a transparent background. Use a PNG with transparency, or an SVG on websites.

Do I need the AI file if I do not have the software?

It is worth keeping for the future, because any designer working on your materials later will find it useful. You will not need it day to day.