Printed material remains part of everyday life for most small businesses and organisations: business cards, leaflets, posters, menus, appointment cards, annual reports and event programmes. Printers work to technical requirements that can seem obscure, and getting them wrong can mean a white line along the edge of every card, text cut off at the trim, blurry photographs or colours that look nothing like the screen.

This guide explains the main print terms in plain English and gives a checklist for preparing files. It applies whether you are briefing a designer, using a printer's template or setting up artwork yourself.

Trim, bleed and safe area

Printers rarely print on paper already cut to the final size. They print on larger sheets, often with several items side by side, and then cut them down. That cut is never perfectly precise, so artwork has to allow a margin of error in both directions.

  • Trim size: the final size of the finished item, for example an A5 leaflet.
  • Bleed: an extra strip of artwork beyond the trim line, on every edge where colour or images run to the edge. Many printers specify 3 mm on each edge in their artwork guidelines, but always check the specification of the printer you use. Without bleed, a slight shift in cutting leaves a thin white line.
  • Safe area: a margin inside the trim line where nothing important should sit, such as text or logos, so that it cannot be cut off. Printers state the margin they recommend, and it is usually larger for booklets.
  • Crop marks: small lines outside the artwork that show the printer where to cut.

In practice, any background colour or photograph that touches the edge should extend into the bleed, and any text should stay comfortably inside the safe area.

Paper sizes

The UK uses the international A series of paper sizes defined in the standard ISO 216. Each size is half the one before it, with the same proportions, which makes it easy to scale artwork between sizes.

SizeDimensions (mm)Typical uses
A3297 × 420Posters, notices
A4210 × 297Letters, flyers, reports
A5148 × 210Leaflets, flyers, menus
A6105 × 148Postcards, small flyers
DL99 × 210Leaflets that fit a DL envelope, compliment slips

DL, a third of an A4 sheet, is not part of the A series but is widely used for leaflets because an A4 sheet folded twice produces it. For business cards and other small items, use the template your printer provides rather than assuming a size.

Colour: CMYK, spot colours and why the screen misleads

Most printing uses four process inks: cyan, magenta, yellow and black, known as CMYK. Screens use red, green and blue light, known as RGB, and can show some bright colours that inks cannot reproduce. Files for print should therefore be prepared in CMYK, or converted carefully, so that you see a realistic preview on screen before printing.

Many printers in the UK and Europe work to process standards based on ISO 12647 and supply a colour profile, a file that tells design software how their inks and paper behave. If your printer provides one, use it when exporting artwork.

Spot colours are premixed inks, usually specified using the Pantone Matching System. They give a consistent, exact colour, which is useful for a strong brand colour on packaging or signage, but they add a separate ink to the job. For short runs of leaflets on digital presses, printers generally convert everything to CMYK.

Rich black and registration black

Black text should normally be printed in black ink only. Large areas of black can look washed out in black ink alone, so designers sometimes add other inks underneath to create a “rich black”. Small text should not be set in rich black, because any slight misalignment between the inks creates coloured fringes around the letters. Never use “registration” black, which is 100 per cent of all four inks and is intended only for printers' marks.

Resolution of images

Photographs and other raster images need enough pixels for their printed size. The usual target is 300 pixels per inch at the final size. An image that looks sharp on screen can still be far too small for print, because screens show images at much lower densities. A photograph saved from a website or social media is rarely suitable for print, and it may also be protected by copyright.

Logos, text and illustrations should be vector artwork wherever possible, because vectors print sharply at any size. A logo pasted into a document as a small image is one of the most common causes of fuzzy print.

Paper weight, coating and finishes

Paper weight

Paper weight is measured in grams per square metre, written gsm. Higher numbers mean thicker, stiffer paper. Everyday office paper is light, flyers and leaflets are usually printed on heavier stock, and business cards and postcards on heavier board still. Ask your printer for samples. Holding a printed item tells you far more than a number in a specification.

Coated and uncoated paper

Coated papers have a surface treatment that keeps ink on top, producing sharp images and vivid colour. They come in gloss, silk and matt finishes. Uncoated papers absorb more ink, which gives softer colours and a natural feel, and they are easier to write on, which matters for appointment cards, forms and notepads.

Finishes

  • Lamination: a thin film applied to protect the surface, in gloss, matt or soft-touch versions.
  • Spot UV: a glossy varnish applied to selected areas only, such as the logo.
  • Foiling: metallic or coloured foil pressed onto the surface.
  • Embossing and debossing: raised or pressed-in areas that add texture.
  • Creasing: heavier papers need to be creased before folding to prevent cracking along the fold.

Finishes can make an item feel special, but they also affect recyclability. Plastic lamination, for example, can make paper harder to recycle. Ask the printer about the environmental implications of each option and about certified paper sources, such as stock certified by the Forest Stewardship Council (FSC).

Preparing a print-ready PDF

Most printers ask for a print-ready PDF. Standards such as PDF/X-1a and PDF/X-4, published by the International Organization for Standardization in the ISO 15930 series, exist specifically for exchanging print files, and they embed fonts and colour information so that the printer receives exactly what you intended. Your printer will tell you which they prefer.

  1. Set up the document at the trim size, with bleed added on all edges.
  2. Keep text and logos inside the safe area.
  3. Use CMYK or the printer's colour profile, and spot colours only where agreed.
  4. Check that photographs are at least 300 pixels per inch at their placed size.
  5. Embed fonts or convert them to outlines, as the printer requests.
  6. Export with crop marks and bleed included, if the printer asks for them.
  7. Name the file clearly, including the item, the size and a version number.

Proofs: the last chance to catch mistakes

A proof is a preview of the job before the full run. A digital proof, usually a PDF, lets you check layout, spelling and content. A hard-copy proof, printed on the real paper, shows the actual colours and feel. For anything where colour really matters, such as packaging or a large run of brochures, a printed proof is worth requesting.

Check the proof slowly, ideally with two people. Read every phone number, email address and web address aloud. Look at the edges for unexpected white lines, and at the folds to make sure no text sits across them. Once you approve a proof, mistakes in it are usually your responsibility rather than the printer's.

Digital or litho printing?

Printers use two main methods. Digital printing works much like a large office printer and suits short runs, personalised items and quick turnaround. Lithographic printing, usually called litho, uses plates and ink and becomes more economical for longer runs, with excellent colour consistency and a wider choice of papers. Your printer will usually recommend a method based on quantity and paper, but knowing the difference helps you understand why the cost per item changes so much with quantity.

Folds and formats for leaflets

Folded leaflets need particular care, because the panels are not all the same width. In a leaflet folded into three, known as a roll fold or letter fold, the panel that tucks inside is usually slightly narrower so that it folds without buckling. Using the printer's template avoids this problem. Plan the reading order too: the front panel, the panel revealed when the leaflet is first opened and the inside spread are seen in that sequence, so put the most important message where the reader looks first.

Frequently asked questions

Why is there a white line along the edge of my printed cards?

The artwork was probably supplied without bleed, or the background stopped exactly at the trim line. A small shift during cutting then exposes unprinted paper. Supplying artwork with bleed prevents this.

Can I send a Word document to a printer?

Some printers accept them, but word processors are not designed for professional print. Fonts may change, colours are usually in RGB and bleed is hard to set up. Exporting a PDF to the printer's specification, or asking a designer to set up the file, gives more reliable results.

What does 300 dpi mean?

Strictly, dpi (dots per inch) describes printers and ppi (pixels per inch) describes images, but the terms are often used interchangeably. Having 300 pixels for every inch of printed size is the usual target for photographs to look sharp.

Is recycled paper lower quality?

Not necessarily. Recycled papers range from rough and natural to smooth and bright. Ask your printer for samples and print a proof of your design on the paper you are considering, especially if it contains photographs.